Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Window Switch Panel on the Honda Civic

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Power window switch

See other generations:
Video tutorial

This guide outlines the steps to remove and replace the window switch panel on the Honda Civic, following the instructions below. First, open the front door and start prising the sides of the window switch panel using a thin tool.

Then, disconnect the electrical connector located underneath, as shown in the video. At this point, unscrew the button screws if you wish to remove and replace them, first removing the plastic cover.

Finally, reassemble everything, following the video tutorial to the end!


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Remove the Right Door Panel on the Honda Civic?
How to Remove the Right Door Panel on the Honda Civic?
Honda Civic (2006-2012 / MK 8) To remove the door panel on the Honda Civic, lift the plastic covering the window switch with a lever-like object and disconnect its connector. Then,…
How to Remove the Door Panel on the Honda Civic?
How to Remove the Door Panel on the Honda Civic?
Honda Civic (2001-2006 / MK 7) To remove the door panel on the Honda Civic, use a tool to pry off the trims on the panel, located around the wing mirror, at the internal handle, an…
How to Remove the Window Winder Handle on a Honda Civic
How to Remove the Window Winder Handle on a Honda Civic
Honda Civic (1995-2001 / MK 6) Before you can start, open the door of your Honda Civic. Begin by inserting a thin but sturdy tool into the gap between the window winder handle and …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos