Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Right Door Panel on the Honda Civic?

Model: Honda Civic MK 8 - Years 2006-2012
Part: Door trim panel

To remove the door panel on the Honda Civic, lift the plastic covering the window switch with a lever-like object and disconnect its connector. Then, loosen the screws underneath and those located at the internal handle's base. Once all these screws are loosened, you can unclip the clips securing the panel and disconnect the connector. When the panel is free, remove it and replace it. The new panel must be connected to the connector, secured with clips and screws, and locked in place by inserting the window switch.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Honda Civic
How to Remove the Door Panel of a Honda Civic
Honda Civic (2001-2006 / MK 7) Before starting, open the front door of your Ford Fiesta. Begin by prising out and removing the inserts from the door panel. Next, unscrew and remove…
How to remove the door panel of the Honda Civic?
How to remove the door panel of the Honda Civic?
Honda Civic (2012-2015 / MK 9) To remove the door panel of the Honda Civic, you need to pry with an object to detach the window switch panel. Once this has been removed, you can un…
How to Remove the Door Panel on the Honda Civic?
How to Remove the Door Panel on the Honda Civic?
Honda Civic (2001-2006 / MK 7) To remove the door panel on the Honda Civic, use a tool to pry off the trims on the panel, located around the wing mirror, at the internal handle, an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos