Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Window Regulator Motor

Model: Honda Accord MK 5 - Years 1993-1998
Part: Power window motor

To access the window regulator system, first remove the door panel. Remove the fastening screws located inside the opening handle and the window switch panel; unclip the pressure clips along the edges of the panel and remove it. At this point, detach the panel supports and unclip all the cable pass-throughs to remove the internal plastic covering (detach it along the edges, taking care not to tear it).
Reconnect the switch panel, lower the glass until the fastening pins align with the access holes for removal, loosen the pins, and pull the glass from the support, securing it to the door frame with tape. Complete the removal of the fastening pins of the window regulator system and extract it from inside the door to replace it with the new one. Position the new one in its place, tighten the fastening pins, reattach the glass to the support, and proceed in reverse for reassembling the panel.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Window Regulator on a Honda Accord?
How to Replace the Window Regulator on a Honda Accord?
Honda Accord (2002-2007 / MK 7) To replace the window regulator on a Honda Accord, unscrew the screws securing the corresponding door panel; these are located at the handle recess a…
Rear Window Regulator Repair
Rear Window Regulator Repair
Honda Accord (1993-1998 / MK 5) First, remove the door panel: unscrew the fixing screws, detach the triangular plastic cover, the clips along the edge of the panel, and the opening …
How to replace the starter motor of a Honda Accord?
How to replace the starter motor of a Honda Accord?
Honda Accord (1993-1998 / MK 5) To replace the starter motor of a Honda Accord, first disconnect the negative cable of the battery to avoid short circuits. Lift the vehicle using a …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos