Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Window Regulator Repair

Model: Honda Accord MK 5 - Years: 1993, 1994, 1995, 1996, 1997, 1998
Part: Power window motor

See other generations:
Video tutorial

First, remove the door panel: unscrew the fixing screws, detach the triangular plastic cover, the clips along the edge of the panel, and the opening handle. Once the panel is removed, unscrew the fixing screws of the support plate located in the centre of the door and take it out. Now lower the window so that the locking pins of the glass retaining clips align with the corresponding holes in the panel, then loosen the pins, lift the glass, and secure it to the door frame with tape.

Next, unscrew all the fixing pins of the window regulator and extract it through the hole at the bottom left of the door. Finally, insert the new window regulator and reverse the steps for reassembly.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Window Regulator Seal Repair
Window Regulator Seal Repair
Honda Accord (1990-1993 / MK 4) The first operation to perform is to remove the door panel. Using a small flat screwdriver, remove the plastic cap inside the handle and unscrew the …
Replacement of Window Regulator Motor
Replacement of Window Regulator Motor
Honda Accord (1993-1998 / MK 5) To access the window regulator system, first remove the door panel. Remove the fastening screws located inside the opening handle and the window swit…
How to Lower the Windows Using the Remote Key on a Honda Accord
How to Lower the Windows Using the Remote Key on a Honda Accord
Honda Accord (2008-2013 / MK 8) In this tutorial, you will learn how to lower the windows using only the remote key on a Honda Accord. To programme the key for this function, press …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos