|
Do it yourself
| |||
| ||||
Replacement and Repair of the Window Regulator
Model: Honda Civic
MK 7
- Years:
2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
In the following video, learn how to install, repair, modify, or replace the damaged or stuck front window regulator of a Honda Civic. First, remove the inner door panel. Manually detach the triangular trim piece near the mirror, then use a small screwdriver to remove the screw cover located in the handle recess. Also, remove the cover under the armrest and unscrew all the screws holding the door panel. Disconnect the electrical connections for the handle and window regulator buttons, then use a lever to extract the inner door panel. Refit the retaining clips on the removed panel and carefully remove the plastic cover. Using a 10 mm ratchet socket and extension, remove the bolts in the centre, then you can extract the glass from the top. Now, after disconnecting the regulator connection and unscrewing the 10 mm bolts that secure it, extract the regulator arm itself and, if necessary, replace it with a new one. After reinserting it, reconnect the electrical connection and secure the regulator with the 10 mm bolts. Insert the new glass from the top, then reassemble everything as it was before.
Updated on 4 February 2026 by ScegliAuto
Related tutorials
Honda Civic
(2001-2006 /
MK 7)
If you need to dismantle the electric window regulator, follow these images to understand how to do it. First, remove the cover behind the door openi…
Honda Civic
(2006-2012 /
MK 8)
Before starting, disconnect the battery of your Honda Civic to work safely. Begin by lifting the front of the car. Next, unscrew and remove the bolts…
Honda Civic
(2001-2006 /
MK 7)
Need to remove the starter motor from the car? Here’s how to do it on a Honda Civic. Before removing the part from the engine bay, disconnect the bat…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |