Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Wiper Replacement on Honda CR-V

Model: Honda CR-V MK 5 - Years 2017-2022
Part: Windshield wipers

Replacing the wiper on the Honda CR-V is really very easy. First, manually lift the arm away from the rear glass of the car. Note the movement of the blade relative to the arm: a small central pin of the blade is lodged in the designated opening of the arm, so you simply need to extract the blade by pulling out the pin. You can do this by hand; it requires a bit of force but is a very simple operation. To fit the new wiper, align the pin in the arm and push until it clicks into place. Check the correct operation of the arm.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wiper Blade on the Honda CR-V
How to Replace the Rear Wiper Blade on the Honda CR-V
Honda CR-V (2017-2022 / MK 5) Discover the instructions for removing and replacing the rear wiper blade on the Honda CR-V. First, move to the tailgate of the boot and begin to lif…
How to Replace the Wiper Blade Rubber on a Honda CR-V
How to Replace the Wiper Blade Rubber on a Honda CR-V
Honda CR-V (2017-2022 / MK 5) This tutorial video shows how to replace the rubber of the rear wiper blade on a Honda CR-V by following a few simple steps that will allow you to ma…
How to Replace the Rear Windscreen Wiper Blade on a Honda CR-V?
How to Replace the Rear Windscreen Wiper Blade on a Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To replace the rear windscreen wiper blade on a Honda CR-V, lift the arm connected to the wiper blade so that the parts are perpendicular to the rear…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos