Do it yourself
Frequently asked questions about cars and motorcycles

Installing Front Spoiler

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Accessory kit

See other generations:
Video tutorial

Position the vehicle on the lift and, after marking the fixing points with a marker and the template provided in the kit, drill at the previously marked point to secure the screw. Also secure the retaining bracket under the body.

Remove the lower skirt of the bumper and then fit the new lowered version in its place. Carefully mount the spoiler, ensuring all retaining hooks align perfectly.

Use a wax pencil to mark the fixing point at the correct distance. Remove the protective adhesive strip from the double-sided tape and align the two elements perfectly.

Secure all screws.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Honda Civic (2012-2015 / MK 9) Do you want to fit a spoiler to your Honda Civic? Here are the instructions: using the supplied template, mark the points that need to be drilled. Th…
Honda Civic (2012-2015 / MK 9) Apply masking tape along the outer edge of the rear boot and attach the drilling template to mark the points for fixing the spoiler. Punch the marked…
Honda Civic (1995-2001 / MK 6) This video shows how to fit a front spoiler on a Honda Civic. First, clean the areas that will contact the adhesive tape thoroughly with alcohol. Als…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos