Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Front Spoiler

Model: Honda Civic MK 6 - Years 1995-2001
Part: Accessory kit

This video shows how to fit a front spoiler on a Honda Civic. First, clean the areas that will contact the adhesive tape thoroughly with alcohol. Also clean the contact areas of the spoiler well. Next, wipe the contact parts with a dry cloth. Apply the 3M double-sided tape as shown in the image. It is better to use multiple pieces (in this case, two) rather than one long piece. Press the tape down firmly to ensure it adheres well. Lift the tape a few centimetres and then carefully position the spoiler against the front of the vehicle. Now remove the backing from the double-sided tape. Apply some pressure to adhere the spoiler to the bumper. Using a drill, make two small holes through the end of the spoiler to the rear edge of the bumper. Now insert the fixing screws. Repeat the same operation on the other side of the spoiler. The spoiler is fitted.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing Front Spoiler
Installing Front Spoiler
Honda Civic (1995-2001 / MK 6) Position the vehicle on the lift and, after marking the fixing points with a marker and the template provided in the kit, drill at the previously mar…
Airbag Warning Light Reset Instructions
Airbag Warning Light Reset Instructions
Honda Civic (1995-2001 / MK 6) The SRS system includes the following components: driver’s front airbag module; passenger’s front airbag module; side airbag module; curtain airbag m…
How to Replace the Key Battery of a Honda Civic
How to Replace the Key Battery of a Honda Civic
Honda Civic (2016-2021 / MK 10) Start by pressing and holding the button located on the front of the key for your Honda Civic, while pulling out the physical emergency key. Next, us…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos