Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Glass on a Honda Civic?

Model: Honda Civic MK 8 - Years 2006-2012
Part: Side window

In this tutorial, you will see how to remove the door glass on a Honda Civic, a very simple operation. To do this, you will need a set of screwdrivers, a 10 mm socket, and a plastic spatula. First, disengage the window switch console, then unscrew the screws located inside the opening handle. Lever along the perimeter to disengage the panel from the door. Once done, disconnect the lock cable, remove the insulating cover, and lift the glass to access the two fixing bolts, which need to be removed. Finally, remove the old glass, insert the replacement, and tighten the two bolts. Reassemble everything by following the reverse procedure.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Glass from the External Rear-View Mirror of the Honda Civic
How to Remove the Glass from the External Rear-View Mirror of the Honda Civic
Honda Civic (2001-2006 / MK 7) In today's video, follow the steps to dismantle and replace the glass of the external rear-view mirror of the Honda Civic. First, position yourself a…
How to Replace the Front Side Window Seal on a Honda Civic
How to Replace the Front Side Window Seal on a Honda Civic
Honda Civic (2006-2012 / MK 8) To replace the front side window seal on a Honda Civic, fully lower the window using the appropriate button. At this point, using a lever tool, detac…
Removing the Door of a Honda Civic
Removing the Door of a Honda Civic
Honda Civic (2001-2006 / MK 7) In today's video, you will see how to remove the door of a Honda Civic. First, open the door and remove the bolt found in the door hinge; then discon…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos