Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Suspension Arm Bush Replacement

Model: Honda Civic MK 7 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Bushings

See other generations:
Video tutorial

The necessary tools are a ratchet spanner, a set of fixed spanners, a bush inserter, and replacement bushes. Lift the car on a ramp to access the mechanics.

Once the suspension connection is located, proceed to remove it by unscrewing all the bolts. Use a small hammer and a drift to knock the bolts out of their seats after thoroughly spraying them with penetrating oil. Remove the worn bushes.

After removing the old bush, insert the new one into the arm using the designated inserter. Reassemble the rest of the mechanics that were previously removed.

Conduct a road test to verify proper operation.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Shock Absorber
Honda Civic (1995-2001 / MK 6) Loosen the wheel nuts and lift the vehicle, securing it safely. Unscrew the bolts and remove the wheel. Support the driveshaft with a hydraulic jack,…
How to Replace the Wishbone on a Honda Civic
How to Replace the Wishbone on a Honda Civic
Honda Civic (2001-2006 / MK 7) If you need to replace the suspension wishbone, lift the vehicle on a ramp and remove the front wheel for better access. Then disconnect the stabilis…
Replacement of Worn Shock Absorbers
Replacement of Worn Shock Absorbers
Honda Civic (1992-1995 / MK 5) You only need an 18 mm socket spanner for this operation. Remove the wheel and unscrew the nut that secures one end of the shock absorber to the vehi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos