Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Worn Shock Absorbers

Model: Honda Civic MK 5 - Years 1992-1995
Part: Shocks

You only need an 18 mm socket spanner for this operation. Remove the wheel and unscrew the nut that secures one end of the shock absorber to the vehicle's chassis. First, securely tie the entire suspension arm assembly to prevent it from falling during the operation. Position the vehicle safely on axle stands and remove the retaining pins of the arm's protection from the suspension. Unscrew the bolt that holds the shock absorber to the steering arm using an 18 mm ratchet spanner and remove the worn suspension. Attach the new shock absorber to the base and then to the chassis.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Civic (2006-2012 / MK 8) Shock absorbers are a part of the car that allows for a smooth and safe drive. When they wear out, they need to be replaced. To remove the worn ones,…
Honda Civic (2006-2012 / MK 8) This video shows how to replace the front shock absorbers. First, locate the upper nut of the shock absorber under the wiper arm fixing nut; once loc…
Honda Civic (2001-2006 / MK 7) Lift the vehicle on a hydraulic lift, remove the rear wheel, and access the boot by removing the side carpet lining to reach the fastening bolts of t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos