Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Fitting a Spoiler

Model: Honda Civic MK 9 - Years: 2012, 2013, 2014, 2015
Part: Body

See other generations:
Video tutorial

Do you want to fit a spoiler to your Honda Civic? Here are the instructions: using the supplied template, mark the points that need to be drilled. The holes should have a diameter of 8.5 mm. Now insert the eyelet clips into the holes and then clean the mounting area with a cloth.

Position the four attachment pins in the spoiler. Apply double-sided tape to the edge of the underside of the spoiler.

Now align the spoiler pins with the eyelets installed on the boot and manually apply some pressure to the spoiler to ensure it clips in place. Now remove the backing from the double-sided tape and press down in that area to optimise the adhesion.

The spoiler is now fitted! Of course, the weight of the boot has increased, so it is highly recommended to also install the spring opening mechanism.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Installing Rear Spoiler
Installing Rear Spoiler
Honda Civic (2012-2015 / MK 9) Apply masking tape along the outer edge of the rear boot and attach the drilling template to mark the points for fixing the spoiler. Punch the marked…
How to Replace the Key Battery of a Honda Civic
How to Replace the Key Battery of a Honda Civic
Honda Civic (2016-2021 / MK 10) Start by pressing and holding the button located on the front of the key for your Honda Civic, while pulling out the physical emergency key. Next, us…
How to Replace the Clutch Pedal on a Honda Civic
How to Replace the Clutch Pedal on a Honda Civic
Honda Civic (1992-1995 / MK 5) Begin by entering the cabin at the driver's seat. Proceed to remove the lower carpet in the pedal area. Then, disconnect the clutch pump from the ped…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos