Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the External Handle on a Honda Civic mk7

Model: Honda Civic MK 7 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Handle

See other generations:
Video tutorial

This guide shows how to replace the external handle on a Honda Civic mk7. The first step is to disconnect the negative terminal of the battery. Unscrew the three fixing screws of the inner panel, two in the recess of the handle and one in the closure grip area.

From the back of the handle, disconnect the lock actuator cable and the connector for the locking button. Using a trim removal tool, detach the switch support and disconnect the electrical connector.

From the newly revealed space, unscrew two more screws. Applying slight force, detach the plastic cover of the mirror.

At this point, use a trim tool to unclip the door panel clips. Remove the soundproofing sheet and keep it safe.

Slide the glass out from the top of the door after unscrewing the two anchoring bolts. After detaching the white plastic clip, you can remove the door lock actuator pin and the two fixing nuts.

After removing the lock cylinder, you can extract the lock. Reassemble by reversing the steps.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Honda Civic (2006-2012 / MK 8) In this tutorial, see how to replace the external handle on a Honda Civic, a very simple and quick operation. Before proceeding, you need to remove t…
Honda Civic (1995-2001 / MK 6) Before you can start, open the door of your Honda Civic. Begin by inserting a thin but sturdy tool into the gap between the window winder handle and …
Honda Civic (2006-2012 / MK 8) In this video, learn how to remove and replace the external door handle on the front door of a Honda Civic by following these simple steps. First, op…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos