Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the lock actuator in a Honda CR-V?

Model: Honda CR-V MK 2 - Years 2002-2007
Part: Door lock

In this tutorial, you will see how to replace the lock actuator in a Honda CR-V, a simple operation but one that requires good manual skills. First, go inside the cabin, then remove the indicated plastic rivet and unclip the internal cover of the mirror. Next, unscrew the screws located inside the handle, remove it, and also disassemble the window switch console. Once the last screws are removed, you can separate the panel from the door. At this point, you can unscrew the mounting bolts of the actuator, disconnect the connector, and detach the control cable. To install the replacement, simply follow the reverse procedure.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter of the Honda CR-V 2021
How to Replace the Cabin Filter of the Honda CR-V 2021
Honda CR-V (2017-2022 / MK 5) If you own a Honda CR-V Mk5 (2021) and want to learn how to replace the cabin air filter, simply read this guide carefully and follow the steps descr…
How to Replace the Air Filter on a Honda CR-V?
How to Replace the Air Filter on a Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To replace the air filter on a Honda CR-V, open the bonnet to access the components inside the engine bay: immediately to the right of the engine blo…
How to Replace the Remote Battery on a Honda CR-V?
How to Replace the Remote Battery on a Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To replace the remote battery on a Honda CR-V, loosen the small screw located at the top rear of the device, just below the key. Once this screw is r…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos