Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber on a Honda Amaze?

Model: Honda Amaze MK 1 - Years 2013-2020
Part: Shocks

To replace the rear shock absorber on a Honda Amaze, lift the car so that the rear wheel corresponding to the shock absorber to be removed is not in contact with the ground. This will allow you to loosen the bolts securing the wheel, removing it from its housing. Now, you can unscrew the bolt that secures the shock absorber at its lower part. The bolt securing it at the upper part will be located inside the trunk and can be accessed by lifting the carpet. Once the bolts are loosened, you can insert the new shock absorber and secure it properly.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Honda Amaze
How to Replace the Key Battery of the Honda Amaze
Honda Amaze (2013-2020 / MK 1) Replacing the key battery of your Honda Amaze (Mk1) brings the key back to life at a very low cost and in just a few seconds. Let's discover the vari…
How to Replace the Cabin Air Filter in the Honda Amaze?
How to Replace the Cabin Air Filter in the Honda Amaze?
Honda Amaze (2018-2025 / MK 2) As you can see in this tutorial, replacing the cabin air filter in the Honda Amaze is a very simple and quick task. Since it is located behind the gl…
How to Replace the Headlight Bulb of the Honda Amaze
How to Replace the Headlight Bulb of the Honda Amaze
Honda Amaze (2018-2025 / MK 2) To replace the headlight bulb of the Honda Amaze, open the hood to access the internal components of the engine bay. Specifically, disconnect the con…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos