Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of the Honda Amaze

Model: Honda Amaze MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Key

See other generations:
Video tutorial

Replacing the key battery of your Honda Amaze (Mk1) brings the key back to life at a very low cost and in just a few seconds. Let's discover the various steps to complete this operation.

First, locate the button under the Honda logo and press it. At the same time, completely pull out the physical emergency key and then open the cover using the tip of the key itself or a small flathead screwdriver. Now just replace the old button cell with the new one, and finally, reattach the cover.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in the Remote for the Honda Amaze
How to Replace the Battery in the Remote for the Honda Amaze
Honda Amaze (2018-2025 / MK 2) In today's video, you will see how to replace the battery in the remote for the Honda Amaze. The specific unit is a CR 2032 3V, commonly available at…
How to Replace the Key Battery on the Honda Amaze
How to Replace the Key Battery on the Honda Amaze
Honda Amaze (2018-2025 / MK 2) If the key for your Honda Amaze Mk2 has suddenly stopped working or is experiencing continuous signal drops, you are likely facing a completely (or a…
How to Replace the Remote Battery in the Honda Amaze?
How to Replace the Remote Battery in the Honda Amaze?
Honda Amaze (2018-2025 / MK 2) To replace the remote battery in the Honda Amaze, remove the chrome top part of the device to extract the key from its housing. Once removed, pry ins…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos