Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Honda Amaze - Key

Honda Amaze (2018-2024 / MK 2)
How do you replace the battery of the Honda Amaze remote control?
The battery replacement for the remote control on the Honda Amaze is done by disconnecting the upper chrome part of the device, so that the key can be …read all…
Posted on 1 July 2023 by ScegliAuto
Honda Amaze (2018-2024 / MK 2)
How to replace the key battery of the Honda Amaze
If the key of your Honda Amaze Mk2 has suddenly stopped working or if it has continuous signal drops, most likely you are facing a completely (or almost …read all…
Posted on 6 November 2022 by ScegliAuto
Honda Amaze (2018-2024 / MK 2)
How to replace the battery of the Honda Amaze remote control?
In order to replace the battery of the Honda Amaze remote control you need to remove the upper chromed part of the device, so that you can remove the key from …read all…
Posted on 23 June 2022 by ScegliAuto
Honda Amaze (2018-2024 / MK 2)
How to replace the remote control battery of the Honda Amaze
In today's video you will see how to replace the Honda Amaze remote control battery. The specific unit is a 3V CR 2032, commonly purchased in any physical or …read all…
Posted on 20 May 2022 by ScegliAuto
Honda Amaze (2013-2020 / MK 1)
How to replace the key battery of the Honda Amaze
Replacing the key battery of your Honda Amaze (Mk1) allows you to restore life to the key with a truly negligible total cost and in a few seconds. Let's find …read all…
Posted on 17 May 2024 by ScegliAuto
Shock absorbers (1) Car stereo (1) Key (5) -board computer (1) Cabin air filter (2) Headlight bulb (2) Interior lights ceiling light bulb (1) Engine oil (1) Door panel (1) Brake pads (1) Manufacturer's coat of arms (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos