Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on the Honda Amaze

Model: Honda Amaze MK 2 - Years 2018-2025
Part: Key

If the key for your Honda Amaze Mk2 has suddenly stopped working or is experiencing continuous signal drops, you are likely facing a completely (or almost completely) drained battery. Therefore, it is important to replace it as soon as possible. To perform this operation, simply follow these instructions. Locate and press the button on the cover and remove the physical emergency key. Next, fully open the cover and access the battery to be replaced. Remove it and insert the new one. Finally, reattach the cover and insert the emergency key back inside.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Honda Amaze
How to Replace the Key Battery of the Honda Amaze
Honda Amaze (2013-2020 / MK 1) Replacing the key battery of your Honda Amaze (Mk1) brings the key back to life at a very low cost and in just a few seconds. Let's discover the vari…
How to Replace the Battery in the Remote for the Honda Amaze
How to Replace the Battery in the Remote for the Honda Amaze
Honda Amaze (2018-2025 / MK 2) In today's video, you will see how to replace the battery in the remote for the Honda Amaze. The specific unit is a CR 2032 3V, commonly available at…
How to Replace the Remote Battery of the Honda Amaze?
How to Replace the Remote Battery of the Honda Amaze?
Honda Amaze (2018-2025 / MK 2) To replace the remote battery on the Honda Amaze, detach the chrome top part of the device to extract the key from its slot. Once the key is removed,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos