Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Passport
    4. : Removal of the front bumper of the Honda Passport

Honda Passport - Video tutorial

Model: Honda Passport YF7, YF8 - Years 2019-2024
Part: Front bumper
Operation: Removal of the front bumper of the Honda Passport

We see in this guide the instructions that will allow us to remove and replace the front bumper of the Honda Passport, following these simple steps. First we open the engine hood of our car and start removing the upper engine protection; after which we unscrew the fixing screws that we find on the upper part of the bumper, as shown in the video. At this point we unscrew the screws located on both sides of the front wheel arches; then we gently unclip the bumper on the sides, until it is completely removed, applying the reverse procedure of disassembly!


Posted on 10 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos