Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight from a Honda Passport?

Model: Honda Passport YF7, YF8 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight

See other generations:
Video tutorial

To remove the front headlight from a Honda Passport, first loosen the screws that secure it. These screws will be accessible after removing the front bumper. To remove the bumper, unscrew the screws located at the bottom and inside the wheel wells of the front wheels.

Once the bumper is detached, you can unscrew the screws that secure the headlight in its housing and disconnect the connector at the back. This will allow you to install the new headlight, securing it with the appropriate screws.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulbs in the Honda Passport?
How to replace the rear headlight bulbs in the Honda Passport?
Honda Passport (2019-2026 / YF7, YF8) Replacing the rear headlight bulbs in the Honda Passport, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure …
How to Replace the Rear Headlight Bulb on a Honda Passport?
How to Replace the Rear Headlight Bulb on a Honda Passport?
Honda Passport (1997-2002 / Ck58, Cm58, Dm58) To replace the rear headlight bulb on a Honda Passport, loosen the three side screws that secure the rear headlight in its housing. Once these three …
How to Calibrate the Front Camera of the Honda Passport
How to Calibrate the Front Camera of the Honda Passport
Honda Passport (2019-2026 / YF7, YF8) This guide provides useful instructions on how to calibrate the front camera, primarily used for driver assistance and ADAS, of the Honda Passport. T…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos