Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Honda Passport?

Model: Honda Passport YF7, YF8 - Years 2019-2026
Part: Tail light bulb

Replacing the rear headlight bulbs in the Honda Passport, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure the key is not in the ignition for safety. Then, open the trunk and, using an 8mm socket wrench or a Phillips screwdriver, remove the two bolts securing the headlight. Once done, grasp the light assembly, pull it towards you, and remove it from the body. To remove a bulb, simply rotate the socket slightly counterclockwise.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulb on a Honda Passport?
How to Replace the Rear Headlight Bulb on a Honda Passport?
Honda Passport (1997-2002 / Ck58, Cm58, Dm58) To replace the rear headlight bulb on a Honda Passport, loosen the three side screws that secure the rear headlight in its housing. Once these three …
How to Replace the Cabin Lights of the Honda Passport
Honda Passport (1997-2002 / Ck58, Cm58, Dm58) In this tutorial, you will learn how to replace the dome light bulbs in your Honda Passport, both in the front and rear of the cabin. Specifically, t…
How to Remove the Front Headlight from a Honda Passport?
How to Remove the Front Headlight from a Honda Passport?
Honda Passport (2019-2026 / YF7, YF8) To remove the front headlight from a Honda Passport, first loosen the screws that secure it. These screws will be accessible after removing the front…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos