Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulb on a Honda Passport?

Model: Honda Passport Ck58, Cm58, Dm58 - Years: 1997, 1998, 1999, 2000, 2001, 2002
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear headlight bulb on a Honda Passport, loosen the three side screws that secure the rear headlight in its housing. Once these three screws are loosened, you can pull the headlight from its housing and disconnect the connector at the back.

After the connector is disconnected, extract the bulb from its housing to replace it with a new one. Now, reconnect the connector and insert the headlight back into its place, securing it with the appropriate screws.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulbs in the Honda Passport?
How to replace the rear headlight bulbs in the Honda Passport?
Honda Passport (2019-2026 / YF7, YF8) Replacing the rear headlight bulbs in the Honda Passport, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure …
How to Remove the Front Headlight from a Honda Passport?
How to Remove the Front Headlight from a Honda Passport?
Honda Passport (2019-2026 / YF7, YF8) To remove the front headlight from a Honda Passport, first loosen the screws that secure it. These screws will be accessible after removing the front…
How to Remove the Rear Bumper of the Honda Passport?
How to Remove the Rear Bumper of the Honda Passport?
Honda Passport (2019-2026 / YF7, YF8) To remove the rear bumper of the Honda Passport, open the rear hatch so you can access the two screws located at the corners beneath the weatherstrip…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos