Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Honda Accord

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Battery

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the battery in a Honda Accord. Purchase the necessary replacement parts for the battery (new strap, new hook, earth cable, etc.). The first thing to do is get into the vehicle, switch off the engine, and apply the handbrake.

Lift the bonnet and secure it with the prop rod. Disconnect the negative terminal first, then the positive terminal to avoid generating dangerous sparks for the car's electrical system. Remove the battery hold-down bracket, take off the battery cover, and pull out the old battery.

Secure the battery tray to the bodywork, insert the new battery, and refit the battery cover and hold-down bracket, tightening the battery terminals, positive first, then negative.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in the Honda Accord
How to Replace the Battery in the Honda Accord
Honda Accord (2012-2017 / MK 9) This guide shows you how to remove and replace the battery in the Honda Accord, following the instructions below. First, open the bonnet of your car …
How to Replace the Battery on a Honda Accord?
How to Replace the Battery on a Honda Accord?
Honda Accord (2008-2013 / MK 8) To replace the battery on a Honda Accord, open the bonnet to access the components inside the engine bay. Here, you will find the battery located nea…
How to Replace the Battery in a Honda Accord
How to Replace the Battery in a Honda Accord
Honda Accord (2002-2007 / MK 7) Follow these simple and quick steps to remove and replace the battery in your Honda Accord. First, open the bonnet of your car and start by loosening…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos