Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Roof Rack Guides on the Honda HR-V

Model: Honda Hr V RU, MK 2 - Years 2016-2022

In this video, you will see how to install the two guides for the roof rack on the Honda HR-V. First, thoroughly clean the surfaces of the two black strips where the guides will be applied, as shown in the video. Ensure that no dust or other debris remains. Next, peel off the protective films covering the adhesive underneath the guides and carefully overlay the guides onto the black strips so that they adhere perfectly to the surface. Apply pressure to the brackets starting from one end to the other.

Updated on 1 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Car Radio from the Honda HR-V?
How to Remove the Car Radio from the Honda HR-V?
Honda Hr V (2016-2022 / RU, MK 2) Removing the car radio from the Honda HR-V, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not …
How to Replace the Cabin Filter in the Honda HR-V?
How to Replace the Cabin Filter in the Honda HR-V?
Honda Hr V (1999-2005 / GH, MK 1) Replacing the cabin filter in the Honda HR-V, as shown in this tutorial, is an extremely simple and quick task. First, go to the passenger seat, then…
How to Adjust the Time on the Honda HR-V
How to Adjust the Time on the Honda HR-V
Honda Hr V (2016-2022 / RU, MK 2) In this tutorial, you will see how to adjust the time on the Honda HR-V, a very simple and quick operation, for example, after disconnecting the batt…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos