Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Brake Pads on a Honda HR-V

Model: Honda Hr V RU, MK 2 - Years 2016-2022
Part: Brake pads

Want to replace the rear disc brake pads? Here’s how to remove the pads from a Honda CR-V. Lift the car with a jack and remove the rear wheel, then locate the brake caliper. Unscrew the caliper retaining bolt and remove the caliper from the wheel hub. Use a screwdriver to remove the pads from the caliper, then install the new pads onto the brake caliper. Refit the brake caliper with the support onto the brake disc, tightening all the retaining bolts. Once fitted, you can reattach the rear wheel. Test the car's braking.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Hr V (2016-2022 / RU, MK 2) Let’s look at replacing the battery in a Honda HR-V car key. Take the key and slide the button at the back: remove the small key inside. Pry it open …
Honda Hr V (2016-2022 / RU, MK 2) Reset the tyre pressure on a Honda HR-V by using the "up" and "down" buttons on the right side of the steering wheel, along with the "sel/reset" butt…
Honda Hr V (2016-2022 / RU, MK 2) Follow these steps to perform the routine maintenance service by replacing the engine oil and oil filter of the Honda HR-V. First, lift the vehicle a…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos