Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Build the Trunk Cover for the Honda City

Model: Honda City MK 3, 3A, SX - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002

See other generations:
Video tutorial

An example of the ingenuity of the residents of the Indian subcontinent is definitely in the internal trunk cover of this Honda City, built in four independent wooden pieces, each shaped in a truly artistic way, reminiscent of a violin. Very practical because they allow full use of the trunk of the vehicle and also enable the rear area to be utilized in various ways without having to empty the entire trunk.

It is easy to make; just create the base underneath and then place the shaped boards on top.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Honda City
How to Replace the Air Filter on a Honda City
Honda City (2002-2008 / GD6, GD9, GD7, GD8, GE4, GE1) In this video, you will see how to change the air filter on a Honda City. In the Honda City, the air filter box is located next to the battery. Use a…
How to Replace the Key Battery in a 2010 Honda City
How to Replace the Key Battery in a 2010 Honda City
Honda City (2002-2008 / GD6, GD9, GD7, GD8, GE4, GE1) In this guide, you will learn how to correctly replace the battery in your 2010 Honda City key. First, you need to get a small flathead screwdriver (…
How to Replace the Front Headlight Bulb in a Honda City?
How to Replace the Front Headlight Bulb in a Honda City?
Honda City (2014-2023 / MK 6, GM9, GM4, GM6, GM8, GM5) To replace the front headlight bulb in a Honda City, open the hood to access the rear of the headlight corresponding to the bulb that needs replaceme…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos