Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulb in a Honda Civic?

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

To replace the bulb, remove the entire headlamp starting with the boot seal and removing the clips from the carpet. Next, unscrew all the screws shown in the video and remove the various clips present.

Once done, disconnect the electrical connectors and then move to the bumper, which you need to pull away from the headlamp to access the nuts holding the headlamp in place. Remove them and also extract the four nuts located behind the headlamp, which you can now grasp with your hands and pull away from its housing.

Remove the blown bulbs and replace them with new ones.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlamp Bulb on a Honda Civic?
How to Replace the Rear Headlamp Bulb on a Honda Civic?
Honda Civic (2012-2015 / MK 9) To replace the rear headlamp bulb on a Honda Civic, open the boot and detach the clips securing the carpet near the inside of the headlamp. Once the …
How to replace the headlight bulb of the Honda Civic
How to replace the headlight bulb of the Honda Civic
Honda Civic (2016-2021 / MK 10) If you want to completely replace the front headlight bulb of your Honda Civic by yourself, then the following guide is all you need. First of all, g…
How to Replace the Front Headlamp Bulb on a Honda Civic?
How to Replace the Front Headlamp Bulb on a Honda Civic?
Honda Civic (2006-2012 / MK 8) To replace the front headlamp bulb on a Honda Civic, detach the rivets securing the inner wheel arch cover corresponding to the bulb that needs repla…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos