Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Honda Ridgeline

Model: Honda Ridgeline MK 1 - Years 2005-2014
Part: Rear bumper

This guide provides the instructions needed to remove and replace the rear bumper of the Honda Ridgeline. First, move to the rear and start by removing the license plate lights, prying from the sides and disconnecting the electrical connectors located at the back; then remove the license plate and the license plate holder. At this point, unscrew the mounting screws of the taillights, disconnecting all the electrical wires; then unscrew the additional screws of the bumper, which are also located at the bottom, until you completely remove it from the body. Apply the reverse procedure for reassembly!

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Fender on a Honda Ridgeline?
How to Remove the Rear Fender on a Honda Ridgeline?
Honda Ridgeline (2016-2024 / MK 2) To remove the rear fender on a Honda Ridgeline, detach the trim located at the top of the fender along its entire length. Once this is removed, you c…
How to Repair the Rear Window Slider of the Honda Ridgeline
How to Repair the Rear Window Slider of the Honda Ridgeline
Honda Ridgeline (2016-2024 / MK 2) On this Honda Ridgeline, the rear glass panel - which is also the rear window of the pickup - is broken. At the top of the window track, there is a b…
How to Change the Color of the Honda Emblem and the Ridgeline Name on a Honda Ridgeline
How to Change the Color of the Honda Emblem and the Ridgeline Name on a Honda Ridgeline
Honda Ridgeline (2016-2024 / MK 2) If there was a stereotype, it was that Americans loved chrome finishes. However, we can say this is not true, as videos of Americans wanting to chang…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos