Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate lights bulbs in the Honda Odyssey?

Model: Honda Odyssey RL4, RL3 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: License plate light

See other generations:
Video tutorial

In this tutorial we can see how to replace the license plate light bulbs in the Honda Odyssey, a very simple and quick operation. First of all, make sure that the key is not inserted, so that we can operate safely.

Then, go to the back of the vehicle, insert a small flathead screwdriver into the side slot of the light in question and, using leverage, unclip it. Next, remove the old bulb, insert the replacement without touching it directly with bare hands, and repeat the operation for the opposite side, if necessary.


Posted on 19 September 2025 by ScegliAuto


Related tutorials

How do you reset the Service light on the Honda Odyssey?
How do you reset the Service light on the Honda Odyssey?
Honda Odyssey (2011-2017 / RL5) To reset the Service light on the Honda Odyssey, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. …
How to Change the Headlight Bulb on a Honda Odyssey
How to Change the Headlight Bulb on a Honda Odyssey
Honda Odyssey (2011-2017 / RL5) In this brief tutorial, we will show you the entire process needed to change the low beam bulb (H11) on a Honda Odyssey, produced from 2011 to 2017. …
How to replace the front headlight bulb of the Honda Odyssey
How to replace the front headlight bulb of the Honda Odyssey
Honda Odyssey (2011-2017 / RL5) Replacing the bulb of the right front headlight is a very simple and quick operation to perform on a Honda Odyssey produced from 2011 to 2017 because…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos