Do it yourself
| ||||
|
Honda Odyssey - Video tutorial
Model: Honda Odyssey
RL5
- Years 2011-2017 In this very short tutorial today, we are shown the entire process necessary to change the low beam bulb (H11) on a Honda Odyssey, a model in production from 2011 to 2017. Therefore, the operation is very simple to perform and we can do it independently and in a few seconds, let's see how to proceed. We start by opening the vehicle's engine hood, then we disconnect the bulb connector located behind the headlight, and then rotate the bulb counterclockwise and remove it. Finally, we follow the reverse procedure to install a new bulb.
Posted on 30 September 2023 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.058
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |