Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Odyssey
    4. : How to replace the front headlights of a Honda Odyssey.

Honda Odyssey - Video tutorial

Model: Honda Odyssey RL4, RL3 - Years 2005-2010
Part: Headlight
Operation: How to replace the front headlights of a Honda Odyssey.

In today's video tutorial, we will see the necessary guide to disassemble and replace the front headlights of the Honda Odyssey. First, we open the engine hood of our car and begin to unscrew all the fixing screws that we find on the upper and lower part of the bumper; then we unscrew the additional screws located on both sides of the wheel arches, releasing the front bumper until it is completely removed, as shown in the video. At this point, we unscrew the fixing screws of the front headlight, disconnecting the electrical connector of the bulbs to remove and replace it with the new one; we then install the new headlight assembly!


Posted on 9 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos