Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Number Plate Light on a Honda Jazz

Model: Honda Jazz MK 2 - Years 2008-2013
Part: License plate light

To replace the number plate light on a Honda Jazz, position yourself at the rear of the vehicle and locate the lamp holder above the number plate. Using a flat screwdriver inserted into the small side slot, gently lever to detach the light unit from the bumper or tailgate. Once removed, disconnect the electrical connector by pressing the locking tab. Remove the bulb from the lamp holder by pulling it out or twisting it, depending on the type. Insert the new bulb of the same model, reconnect the connector, and reinsert the light unit into its housing, pressing until it clicks into place.

Posted on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Jazz (2013-2019 / MK 3) Is the number plate bulb no longer working? Let's look at removing the light that illuminates the number plate on the Honda Jazz. Lift the tailgate, …
Honda Jazz (2008-2013 / MK 2) Adjusting the front headlights of the Honda Jazz is very simple. To achieve an accurate adjustment, it is recommended to perform the operation in the…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos