Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Honda Passport

Model: Honda Passport Ck58, Cm58, Dm58 - Years 1997-2002
Part: Brake pads

In today's video, you will see the main instructions for removing and replacing the front brake pads on the Honda Passport. First, lift the vehicle and remove the front wheel; then, unscrew the bolts securing the front brake caliper, removing it from the rotor, as shown in the video. At this point, apply pressure to the caliper piston to remove the old brake pads from the bracket; clean any dirt from the braking system and install the new high-quality brake pads, following the video tutorial to the end!

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Calibrate the Front Camera of the Honda Passport
How to Calibrate the Front Camera of the Honda Passport
Honda Passport (2019-2026 / YF7, YF8) This guide provides useful instructions on how to calibrate the front camera, primarily used for driver assistance and ADAS, of the Honda Passport. T…
Removing the Front Door Panel of the Honda Passport
Removing the Front Door Panel of the Honda Passport
Honda Passport (2019-2026 / YF7, YF8) Today, follow this brief and simple guide for instructions on how to remove and replace the front door panel of the Honda Passport. First, open the f…
How to Replace the Key Battery of the Honda Passport
How to Replace the Key Battery of the Honda Passport
Honda Passport (1997-2002 / Ck58, Cm58, Dm58) To replace the old button cell inside your Honda Passport key, follow these simple and quick steps. Just follow the instructions below and put them i…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos