Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre light on the Honda Accord?

Model: Honda Accord MK 9 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, you can see how to reset the tyre light on the Honda Accord, a very simple and quick operation to perform only after restoring the correct pressure in each tyre according to the instructions in the manual. First, go inside the cabin, then turn on the instrument panel, not the engine, and locate the button depicting the same light located below the dashboard.

At this point, press and hold the button for about 10 seconds, or for as long as necessary for the light to disappear completely.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on the Honda Accord?
How to Reset the Tyre Pressure Light on the Honda Accord?
Honda Accord (2018-2023 / MK 10) To reset the tyre pressure light on the Honda Accord, turn on the ignition by turning the key in the ignition switch. This will allow you to select "…
How to Reset the Tyre Pressure Warning Light on a Honda Accord
How to Reset the Tyre Pressure Warning Light on a Honda Accord
Honda Accord (2018-2023 / MK 10) To reset the tyre pressure warning light on a Honda Accord, first turn on the ignition. Then, navigate through the menu on the central display: selec…
How to Reset the Tyre Pressure Warning Light on the Honda Accord
How to Reset the Tyre Pressure Warning Light on the Honda Accord
Honda Accord (2018-2023 / MK 10) The procedure to reset the tyre pressure warning light (TPMS) on the Honda Accord takes just a few seconds; before performing the reset, ensure that …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos