Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery of the 2019 Honda Civic

Model: Honda Civic MK 10 - Years: 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

If the key for your 2019 Honda Civic has stopped working due to a flat battery, don't worry as this guide describes all the necessary steps to complete the battery replacement independently. First, remove the physical emergency key, then take a small flat screwdriver and use it to open the key cover.

At this point, you have free access to the exhausted button battery and can replace it with a new CR2032 battery. Finally, reassemble the key cover and you are done.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

Honda Civic (2016-2021 / MK 10) Start by pressing the rear button of the key for your Honda Civic to extract the physical emergency key. Next, using the emergency key as a lever, pr…
Honda Civic (2016-2021 / MK 10) Start by pressing and holding the button located on the front of the key for your Honda Civic, while pulling out the physical emergency key. Next, us…
Honda Civic (2016-2021 / MK 10) Today, we will explain the steps to replace the battery in the key/remote of a Honda Civic. The first step is to slide the button on the back of the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos