Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the engine of the Husaberg FE 450?

Model: Husaberg Fe 450
Part: Engine

Video tutorial

The engine of the Husaberg FE 450 can be disassembled by loosening the screws that secure it to its housing in the central lower part of the frame: once the screws have been loosened, it will be possible to proceed by disconnecting the connectors and removing the intake and exhaust manifolds.

This will allow you to loosen the screws that secure the cylinder, thus gaining access to the piston and disconnecting it from the connecting rod. You will now have access to the crankshaft and all other internal components: these can be replaced as needed, and then the engine can be closed up again.


Posted on 30 November 2025 by ScegliAuto


Related tutorials

How do you dismantle the engine of the Husaberg FE 450?
How do you dismantle the engine of the Husaberg FE 450?
Fe 450 It will be possible to disassemble the engine of the Husaberg FE 450 by loosening the screws that fix the block to its housing: all connectors connec…
How to Dismantle the Engine of the Husaberg FE 450?
How to Dismantle the Engine of the Husaberg FE 450?
Fe 450 To dismantle the engine of the Husaberg FE 450, first extract it from its housing by loosening the bolts that secure it to the mounts and disconnecti…
How to Dismantle the Engine of the Husaberg FE 450?
How to Dismantle the Engine of the Husaberg FE 450?
Fe 450 To dismantle the engine on the Husaberg FE 450, first loosen the bolts securing the engine block in its housing, then disconnect all connectors and r…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos