Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust of the Husaberg TE 125, you need to loosen the screws that secure the cover panel located on the right side of the vehicle, near the fender: once this panel has been removed, you can proceed to loosen the screws that attach the exhaust to its supports. At this point, you will need to widen the connecting ring between the exhaust and the exhaust manifold: then you should insert the new one, securing it with the appropriate screws and connecting it to the exhaust manifold to ensure everything works.

Posted on 22 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Muffler Belly on a Husaberg TE 125
How to Remove the Muffler Belly on a Husaberg TE 125
Te 125 Before you start, position your Husaberg TE 125 on its side stand. This operation must be performed with the engine and exhaust cold. Begin by unscre…
How to Replace the Piston in the Husaberg TE 125
How to Replace the Piston in the Husaberg TE 125
Te 125 In this guide, you will find instructions on how to remove and replace the cylinder head and piston of the Husaberg TE 125 enduro bike. First, place …
How do you disassemble the engine of the Husaberg TE 125?
How do you disassemble the engine of the Husaberg TE 125?
Te 125 In order to disassemble the engine of the Husaberg TE 125, you need to loosen the screws that fix the engine block to its housing, so that the latter…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos