Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the exhaust pipe of the Husaberg TE 125, you need to loosen the screws that secure the side fairing of the rear fender of the motorcycle: once the fastening screws of this panel have been loosened, it will be possible to locate the screws of the supports of the exhaust pipe below. Loosening the support screws will then allow you to widen the ring that connects the exhaust terminal to its seat in order to completely remove the old exhaust pipe; the new one can now be inserted and fixed, checking that everything works and reinstalling the side panel of the fender.

Posted on 20 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the exhaust on Husaberg Te 125
How to disassemble the exhaust on Husaberg Te 125
Te 125 To disassemble the exhaust pipe of a Husaberg TE 125, follow these steps. Place the motorcycle on the side stand: make sure the engine and exhaust pi…
How do you replace the muffler on the Husaberg TE 125?
How do you replace the muffler on the Husaberg TE 125?
Te 125 To replace the exhaust of the Husaberg TE 125, you need to loosen the screws that secure the cover panel located on the right side of the vehicle, ne…
How to Remove the Muffler Belly on a Husaberg TE 125
How to Remove the Muffler Belly on a Husaberg TE 125
Te 125 Before you start, position your Husaberg TE 125 on its side stand. This operation must be performed with the engine and exhaust cold. Begin by unscre…

How to Replace the Air Filter on a Honda XL1000 Varadero?

In this tutorial, you will see how to replace the air filter on a Honda XL1000 Varadero, a very simple operation. First, remove the seat, then unscrew the two rear mounting bolts of the tank, the two front ones, and the remaining ones located on the sides. Once done, close the two fuel taps, disconnect the rubber hose, and lift the tank. At this point, you will have access to the filter box, which can be opened by removing the 8 screws around the perimeter. Once the filter is replaced, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos