Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Husaberg Te 125 - Video guides

Husaberg Te 125
How to replace the air filter on a Husaberg TE 125?
You can replace the air filter on the Husaberg TE 125 by loosening the screws that secure the triangular cover panel located on the left side of the bike, just …Read all…
Posted on 10 November 2026 by ScegliAuto
Husaberg Te 125
How do you replace the muffler on the Husaberg TE 125?
To replace the exhaust of the Husaberg TE 125, you need to loosen the screws that secure the cover panel located on the right side of the vehicle, near the …Read all…
Posted on 22 January 2026 by ScegliAuto
Husaberg Te 125
How to disassemble the exhaust on Husaberg Te 125
To disassemble the exhaust pipe of a Husaberg TE 125, follow these steps. Place the motorcycle on the side stand: make sure the engine and exhaust pipe are …Read all…
Posted on 6 January 2025 by ScegliAuto
Husaberg Te 125
How to Replace the Exhaust on a Husaberg TE 125?
To replace the exhaust on the Husaberg TE 125, first loosen the screws securing the side panel of the rear mudguard. Once the screws are loosened, you can …Read all…
Posted on 30 October 2026 by ScegliAuto
Husaberg Te 125
How to Dismantle the Engine of a Husaberg TE 125?
To dismantle the engine of a Husaberg TE 125, you need to loosen the screws that secure the engine block to its housing so that it can be extracted after …Read all…
Posted on 28 October 2026 by ScegliAuto
Husaberg Te 125
How to Polish the Clutch Cover of the Husaberg TE 125
This guide provides instructions to disassemble and polish the small clutch cover of the Husaberg TE 125 enduro bike. First, place the bike on a stand and …Read all…
Posted on 10 August 2026 by ScegliAuto
Husaberg Te 125
How to Replace the Piston in the Husaberg TE 125
In this guide, you will find instructions on how to remove and replace the cylinder head and piston of the Husaberg TE 125 enduro bike. First, place your bike …Read all…
Posted on 13 September 2026 by ScegliAuto
Husaberg Te 125
How to Remove the Muffler Belly on a Husaberg TE 125
Before you start, position your Husaberg TE 125 on its side stand. This operation must be performed with the engine and exhaust cold. Begin by unscrewing and …Read all…
Posted on 26 May 2026 by ScegliAuto
Husaberg Te 125
How to Change the Piston on a Husaberg TE 125
In this video, we will see the main steps to disassemble and replace the piston of the cylinder group on a Husaberg TE 125 enduro bike. First, remove the fuel …Read all…
Posted on 24 May 2026 by ScegliAuto
Husaberg Te 125
Engine Oil Change on Husaberg TE 125 2T
In this video, learn how to change the engine oil on a Husaberg TE 125 two-stroke by following these simple steps. First, warm up the engine for a few minutes …Read all…
Posted on 18 May 2026 by ScegliAuto
Husaberg Te 125
Piston Replacement on Husaberg Te 125
Drain the coolant by unscrewing the drain plug (see video), then remove the radiator hoses connected to the cylinder. Remove the expansion tank and then the …Read all…
Posted on 29 April 2026 by ScegliAuto
Husaberg Te 125
How to Change the Engine Oil of the Husaberg TE 125
After positioning the bike on a flat surface and securing it in a stable and safe position for working, remove the engine protection from water and mud located …Read all…
Posted on 31 March 2026 by ScegliAuto

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos