Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Piston on a Husaberg TE 125

Model: Husaberg Te 125

Video tutorial

In this video, we will see the main steps to disassemble and replace the piston of the cylinder group on a Husaberg TE 125 enduro bike. First, remove the fuel tank and exhaust, unscrewing all the securing screws; then drain the coolant by opening the bleed screw.

Now, begin disassembling the cylinder head by unscrewing the spark plug and the upper securing bolts; once removed, gently slide out the cylinder, then remove the piston circlip and the pin: now replace the piston!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Replace the Piston in the Husaberg TE 125
How to Replace the Piston in the Husaberg TE 125
Te 125 In this guide, you will find instructions on how to remove and replace the cylinder head and piston of the Husaberg TE 125 enduro bike. First, place …
Piston Replacement on Husaberg Te 125
Piston Replacement on Husaberg Te 125
Te 125 Drain the coolant by unscrewing the drain plug (see video), then remove the radiator hoses connected to the cylinder. Remove the expansion tank and t…
How to Remove the Muffler Belly on a Husaberg TE 125
How to Remove the Muffler Belly on a Husaberg TE 125
Te 125 Before you start, position your Husaberg TE 125 on its side stand. This operation must be performed with the engine and exhaust cold. Begin by unscre…

How to Replace the Air Filter on the Kawasaki Ninja 1000 SX?

In this tutorial, you will see how to replace the air filter on the Kawasaki Ninja 1000 SX, a very simple and quick operation. First, remove the seat, then take off both side panels by unscrewing the respective screws and unscrew the two bolts located at the front of the fuel tank. Next, lift the tank, support it with a rope if necessary, and remove the top cover of the airbox. At this point, extract the old filter, clean the inside of the housing from any dirt residue, and fit the new part by reversing the procedure.

Watch the video!


by ScegliAuto

More videos