Do it yourself
Frequently asked questions about cars and motorcycles
Before you start, position your Husaberg TE 125 on its side stand. This operation must be performed with the engine and exhaust cold. Begin by unscrewing and removing the bolts that secure the muffler belly to the tailpipe and cylinder. Next, unclip the retaining springs. This will free the muffler belly. Proceed to unclip and remove it from its position. Once you have completed this last step, you will have successfully removed the muffler belly from your Husaberg TE 125.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Te 125 To disassemble the exhaust pipe of a Husaberg TE 125, follow these steps. Place the motorcycle on the side stand: make sure the engine and exhaust pi…
Te 125 To replace the exhaust of the Husaberg TE 125, you need to loosen the screws that secure the cover panel located on the right side of the vehicle, ne…
Te 125 In order to replace the exhaust pipe of the Husaberg TE 125, you need to loosen the screws that secure the side fairing of the rear fender of the mot…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos