Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the exhaust on Husaberg Te 125

Model: Husaberg Te 125
Part: Exhaust muffler

Video tutorial

To disassemble the exhaust pipe of a Husaberg TE 125, follow these steps. Place the motorcycle on the side stand: make sure the engine and exhaust pipe are cool (it is therefore recommended to work on it after an hour from turning off the engine).

Unscrew and remove the fixing bolts that hold the belly of the exhaust pipe to the terminal and cylinder. Unhook the fixing springs to release the belly of the exhaust pipe.

Unhook and remove the exhaust pipe from its seat. Proceed in reverse order for reassembly.

This procedure can be useful both for replacing and for cleaning the exhaust pipe.


Posted on 6 January 2025 by ScegliAuto


Related tutorials

How to Change the Piston on a Husaberg TE 125
How to Change the Piston on a Husaberg TE 125
Te 125 In this video, we will see the main steps to disassemble and replace the piston of the cylinder group on a Husaberg TE 125 enduro bike. First, remove…
How do you replace the muffler on the Husaberg TE 125?
How do you replace the muffler on the Husaberg TE 125?
Te 125 To replace the exhaust of the Husaberg TE 125, you need to loosen the screws that secure the cover panel located on the right side of the vehicle, ne…
How to Remove the Muffler Belly on a Husaberg TE 125
How to Remove the Muffler Belly on a Husaberg TE 125
Te 125 Before you start, position your Husaberg TE 125 on its side stand. This operation must be performed with the engine and exhaust cold. Begin by unscre…

How to Replace the Brake Fluid on a Peugeot Citystar 125?

To replace the brake fluid on a Peugeot Citystar 125, you need to connect the tube to the corresponding brake caliper: this will allow you to pump the brake lever, expelling all the old brake fluid from the braking system. Once the fluid has been expelled, disconnect the tube and close the brake caliper again; then, you can loosen the screws that secure the small cap next to the brake lever. Here, you can add the necessary amount of brake fluid, closing the cap afterwards.

Watch the video!


by ScegliAuto

More videos