Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Piston Replacement on Husaberg Te 125

Model: Husaberg Te 125
Part: Engine

Video tutorial

Drain the coolant by unscrewing the drain plug (see video), then remove the radiator hoses connected to the cylinder. Remove the expansion tank and then the bolts from the cylinder head bracket.

Unscrew the bolts securing the cylinder and check the gaskets (replace them if necessary). Remove the piston and, importantly, cover the cylinder to prevent dust and dirt from entering.

When the piston and new parts arrive, lubricate them before installation. Insert the new roller cage into the conrod, then the piston and the pin with the circlips.

Refit the cylinder and proceed in reverse order to disassembly.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Change the Piston on a Husaberg TE 125
How to Change the Piston on a Husaberg TE 125
Te 125 In this video, we will see the main steps to disassemble and replace the piston of the cylinder group on a Husaberg TE 125 enduro bike. First, remove…
How to Replace the Piston in the Husaberg TE 125
How to Replace the Piston in the Husaberg TE 125
Te 125 In this guide, you will find instructions on how to remove and replace the cylinder head and piston of the Husaberg TE 125 enduro bike. First, place …
How to Remove the Muffler Belly on a Husaberg TE 125
How to Remove the Muffler Belly on a Husaberg TE 125
Te 125 Before you start, position your Husaberg TE 125 on its side stand. This operation must be performed with the engine and exhaust cold. Begin by unscre…

How to Replace the Air Filter on the Kawasaki Ninja 1000 SX?

In this tutorial, you will see how to replace the air filter on the Kawasaki Ninja 1000 SX, a very simple and quick operation. First, remove the seat, then take off both side panels by unscrewing the respective screws and unscrew the two bolts located at the front of the fuel tank. Next, lift the tank, support it with a rope if necessary, and remove the top cover of the airbox. At this point, extract the old filter, clean the inside of the housing from any dirt residue, and fit the new part by reversing the procedure.

Watch the video!


by ScegliAuto

More videos