Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on Husaberg TE 125 2T

Model: Husaberg Te 125
Part: Engine oil

Video tutorial

In this video, learn how to change the engine oil on a Husaberg TE 125 two-stroke by following these simple steps. First, warm up the engine for a few minutes to make the oil more fluid; then, unscrew the oil drain bolt located under the engine using a socket spanner.

Allow the engine oil to drain into a container for about ten minutes and clean the magnet on the drain bolt from any metallic debris; finally, insert the new engine oil of the correct type, filling it to the maximum level!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Remove the Muffler Belly on a Husaberg TE 125
How to Remove the Muffler Belly on a Husaberg TE 125
Te 125 Before you start, position your Husaberg TE 125 on its side stand. This operation must be performed with the engine and exhaust cold. Begin by unscre…
How to Change the Piston on a Husaberg TE 125
How to Change the Piston on a Husaberg TE 125
Te 125 In this video, we will see the main steps to disassemble and replace the piston of the cylinder group on a Husaberg TE 125 enduro bike. First, remove…
How to Polish the Clutch Cover of the Husaberg TE 125
How to Polish the Clutch Cover of the Husaberg TE 125
Te 125 This guide provides instructions to disassemble and polish the small clutch cover of the Husaberg TE 125 enduro bike. First, place the bike on a stan…

How to Replace the Brake Fluid on a Peugeot Citystar 125?

To replace the brake fluid on a Peugeot Citystar 125, you need to connect the tube to the corresponding brake caliper: this will allow you to pump the brake lever, expelling all the old brake fluid from the braking system. Once the fluid has been expelled, disconnect the tube and close the brake caliper again; then, you can loosen the screws that secure the small cap next to the brake lever. Here, you can add the necessary amount of brake fluid, closing the cap afterwards.

Watch the video!


by ScegliAuto

More videos