Do it yourself
Frequently asked questions about cars and motorcycles

How to Polish the Clutch Cover of the Husaberg TE 125

Model: Husaberg Te 125

Video tutorial

This guide provides instructions to disassemble and polish the small clutch cover of the Husaberg TE 125 enduro bike. First, place the bike on a stand and begin unscrewing the fixing screws of the clutch side cover to remove it; then polish the clutch cover using fine sandpaper and finally apply a product for the final polishing of aluminium, as shown in the video.

After perfecting the finish, refit the clutch cover onto the engine by reversing the procedure!


Updated on 10 August 2026 by ScegliAuto


Related tutorials

Te 125 Before you start, position your Husaberg TE 125 on its side stand. This operation must be performed with the engine and exhaust cold. Begin by unscre…
Te 125 In this video, we will see the main steps to disassemble and replace the piston of the cylinder group on a Husaberg TE 125 enduro bike. First, remove…
Te 125 To replace the exhaust of the Husaberg TE 125, you need to loosen the screws that secure the cover panel located on the right side of the vehicle, ne…

How to Change the Time on a Yamaha R7

The procedure to change the time displayed on your Yamaha R7 dashboard is quite simple. With the following guide, you will be able to complete it without any difficulty. First, locate the "Res" and "Sel" buttons on the left-hand dial and hold down the "Res" button. At the same time, turn on the ignition and wait for the hour to start flashing. At this point, release the "Res" button and press "Sel" multiple times to change the hour digit. Next, switch to minutes by pressing "Res" and repeat the same procedure.

Watch the video!


by ScegliAuto

More videos