Do it yourself
Frequently asked questions about cars and motorcycles

Clutch and Water Pump Replacement on Husaberg FE 450

Model: Husaberg Fe 450
Part: Clutch

Video tutorial

In this video tutorial, you will see the main instructions on how to disassemble and replace the clutch and water pump on a Husaberg FE 450 motorcycle. First, position your motorcycle on a stand and remove the clutch cover by unscrewing the fastening screws; then unscrew the screws of the clutch pack to subsequently remove the discs.

At this point, proceed to disassemble the clutch basket and then the bell, before removing the water pump; follow the video tutorial to the end to fully understand all the steps.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Fe 450 To replace the clutch on a Husaberg FE 450, start by loosening the bolts that secure the clutch cover, located at the bottom of the right side of the…
Fe 450 In today's video, we will go through the steps to dismantle and replace the clutch discs on the Husaberg FE 450 enduro bike, following the instructio…
Fe 450 To replace the water pump on a Husaberg FE 450, loosen the screws that secure it to its housing on the left side of the bike. Once it is free from th…

How to Adjust the Suspension on a TM Racing 300?

To adjust the suspension on a TM Racing 300, locate the rear shock absorber of the bike: this will be found inside the vehicle, in the area between the rear mudguard and the rear swingarm. Once the shock absorber is located, adjust it by tightening or loosening the bolts found at its lower and upper parts: following the instructions in the manual, you can perform the suspension adjustment and thus adjust the height of the bike according to your riding needs.

Watch the video!


by ScegliAuto

More videos