Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on the Husaberg FE 450

Model: Husaberg Fe 450
Part: Clutch

Video tutorial

In today's video, we will go through the steps to dismantle and replace the clutch discs on the Husaberg FE 450 enduro bike, following the instructions provided below. First, drain the engine oil by unscrewing the oil drain bolt; then, unscrew the screws of the clutch cover located on the sides to remove it and access the clutch, as shown in the video.

At this point, unscrew the central pins of the clutch to remove the discs; replace them with new ones and correctly assemble the new clutch, following the video until the end!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Husaberg FE 450
How to Replace the Clutch on a Husaberg FE 450
Fe 450 To replace the clutch on the Husaberg FE 450, loosen the screws securing the cover located on the lower centre of the right side of the bike. Once th…
How to replace the clutch on the Husaberg FE 450?
How to replace the clutch on the Husaberg FE 450?
Fe 450 To replace the clutch on the Husaberg FE 450, loosen the screws securing the cover located on the lower right side of the bike. Once the cover is rem…
How to Replace the Clutch on a Husaberg FE 450
How to Replace the Clutch on a Husaberg FE 450
Fe 450 To replace the clutch on a Husaberg FE 450, start by loosening the bolts that secure the clutch cover, located at the bottom of the right side of the…

How to Replace the Thermostat on the Gasgas EC 300

This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bike on a stand and disconnect the radiator hose, draining the fluid into a container for about ten minutes; then unscrew the thermostat screws to remove it from the radiator, as shown in the video. At this point, install the new original thermostat valve, securing it to the radiator, then pour in the new coolant and start the engine to circulate it!

Watch the video!


by ScegliAuto

More videos