Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husaberg
    3. :
  3. Fe 450
    4. : How do you replace the clutch on a Husaberg FE 450?

Model: Husaberg Fe 450
Part: Clutch
How do you replace the clutch on a Husaberg FE 450?

Replacing the clutch of the Husaberg FE 450 is done by loosening the screws that fix the casing located on the right side of the bike, in a central low position. Once this casing has been removed, the underlying clutch can be identified. The clutch must be removed from its seat by sliding out all of its discs. Once the old clutch has been removed, the new one can be inserted into its seat and covered with the casing. After installation, it is necessary to ensure that everything is functioning correctly.


Posted on 16 May 2023 by ScegliAuto



How do you replace the clutch of the Husaberg FE 450?
Fe 450 The procedure for replacing the clutch on the Husaberg FE 450 involves loosening the screws that secure the casing located on the right side of the m
How do I replace the clutch on the Husaberg FE 450?
Fe 450 The replacement of the Husaberg FE 450 clutch is carried out by loosening the bolts that secure the clutch housing, located in the lower part of the
How to replace the clutch on the Husaberg FE 450
Fe 450 In today's video we will see the steps on how to disassemble and replace the clutch plates of the Husaberg FE 450 enduro motorcycle, following the in

How to change the engine oil of a Ducati Panigale V4?

To change the motor oil of a Ducati Panigale V4, start by placing the motorcycle on a central or side stand to ensure stability. Start the engine and let it run for a few minutes to heat up the oil and make it more fluid. Turn off the engine and locate the oil drain plug, usually located on the bottom side of the engine. Use an appropriate wrench to unscrew the drain plug and let the used oil drain completely into a collection pan. Once the oil is completely drained, securely tighten the drain plug. Next, locate the oil fill plug on the top side of the engine. Remove the plug and use a funnel to slowly pour the recommended amount of new oil for your motorcycle model. Make sure not to exceed the maximum level indicated on the oil dipstick. Finally, replace the fill plug and ensure it is tightly secured. Check for any oil leaks and start the engine for a few minutes to evenly distribute the new oil in the engine. Once completed, turn off the engine and check the oil level again to ensure it is correct.

Watch the video!


by ScegliAuto

More videos