Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Model: Husaberg Fs 650 Supermoto
Part: Pump

In today's video we will see instructions on how to disassemble the water pump of a Husaberg FS 650 Supermoto. First we go to remove the sleeve that is attached to the water pump and let all the liquid drain into a container; then we disassemble the gear lever, unscrewing the fixing screw. At this point we unscrew the screw of the exhaust manifold, removing the central part, and we unscrew the screws of the water pump casing; we just have to remove the side crankcase half and replace the internal O-rings. If necessary, replace the pump and reassemble everything!


Posted on 1 March 2024 by ScegliAuto



How do you top up the coolant on the Husaberg FS 650?
Fs 650 Supermoto In order to perform the coolant top-up on the Husaberg FS 650, you need to remove the cap that provides access to the tank containing the coolant: th
How do you disassemble the engine of the Husaberg FS 650?
Fs 650 Supermoto The disassembly of the Husaberg FS 650 engine is done by removing the bolts that fix it to its supports in the lower part of the seat: once these bol
How do you disassemble the engine of the Husaberg FS 650?
Fs 650 Supermoto The disassembly operation of the Husaberg FS 650 engine is carried out by first unscrewing the screws that secure the side panels of the motorcycle,

How to change the motor oil of a KTM Duke 390?

To change the motor oil on a KTM Duke 390, start by placing the motorcycle on a stable stand to ensure it is in a vertical position. Under the engine, locate the oil drain plug and remove it with the appropriate wrench, allowing the used oil to completely drain into a suitable container. Once the oil has completely drained, screw the drain plug back on and tighten it properly. Next, locate the oil fill opening on the engine and fill it with the recommended new oil, using a funnel to prevent spills. Check the oil level to make sure it is correct, adding more oil if necessary. After completing the filling, start the engine and let it run for a few minutes to distribute the new oil. Finally, turn off the engine and check the oil level again, adding more if needed.

Watch the video!


by ScegliAuto

More videos