Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Shock Absorber from the Husaberg FE 350?

Model: Husaberg Fe 350
Part: Shocks

Video tutorial

To remove the rear shock absorber from the Husaberg FE 350, use a socket spanner to loosen the bolt located on the right side of the bike. This bolt is accessible by inserting the spanner into the gap just below the seat and above the exhaust pipe.

The second bolt to loosen with the socket spanner is located at the shock absorber, above the swingarm and below the silencer. By loosening this bolt, you will be able to free the shock absorber and slide it out of its housing, replacing it with a new spare part.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to replace the exhaust on the Husaberg FE 350?
How to replace the exhaust on the Husaberg FE 350?
Fe 350 To replace the exhaust on the Husaberg FE 350, loosen the screws that secure the side protection panel of the rear mudguard on the right side of the …
How to replace the air filter on the Husaberg FE 350?
How to replace the air filter on the Husaberg FE 350?
Fe 350 To replace the air filter on the Husaberg FE 350, you need to remove the left side panel of the bike, which is located just below the seat. Under thi…
How to Replace the Countershaft Seal on the Husaberg FE 350?
How to Replace the Countershaft Seal on the Husaberg FE 350?
Fe 350 To replace the countershaft seal on the Husaberg FE 350, you need to loosen the central nut that secures the sprocket, located on the left side of th…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos